Best Wave Pump Aquariums - 2022 Manufacturer's Picks


wave pump aquarium Make the water flow in the fish tank form a large water flow and a large circulation, which is conducive to stabilizing the water quality



Table of contents


1.The role of the wave pump in the aquarium

2.Is the larger the choice of wave pump, the better?

3.Are there any requirements for the location of the wave pump?

4.How long does the wave pump run a day?

5.The difference and use of wave pump aquarium and submersible pump

6.We are aquarium equipment manufacturer



一. The role of the wave pump in the aquarium


1. Main role

The reason why the wave pump is used in the fish tank of ornamental fish is of course not to create waves. Haha, although the fish tank of ornamental fish is not a still water environment, most ornamental fish do not like the strong water flow in the fish tank. This point Let's be clear first. Then the main function of the wave pump in the fish tank is to push the fish excrement and impurities at the bottom of the fish tank to the bottom of the lower filter tank and the upper water of the upper filter tank. In terms of its main function, there is no need to place it in some fish tanks.


2. Secondary role

The secondary function of the wave pump is to make the water temperature in the fish tank more quickly balanced, especially in large tropical fish tanks, if we only place a heating pipe, it may cause the local water temperature of the heating pipe to be too high. The water temperature will not spread quickly, and the existence of the wave pump can make the water temperature quickly equalize. Another is that for some large ornamental fish, the existence of a wave-making pump in the fish tank can moderately exercise the ornamental fish, making their physique stronger and their appetite more exuberant.


二. Is the larger the choice of wave pump, the better?


1. There are not many wave-making pumps in the general one-meter small fish tank. Even if we want to place them, it is best to choose the ones with lower power, such as about 6 watts. This is just an example. It depends on the stocking density of the fish tank, the size of the water flow, and the matching of other various equipment.


2. For large fish tanks over one meter two, the power of the wave pump should be higher, of course, but we also need to see what kind of ornamental fish are being raised, such as small tropical fish or goldfish raised in shallow water. Pumps are also not suitable for them.



三. Are there any requirements for the location of the wave pump?


1: So about the placement of the wave pump, don't we have a suitable method? There must be a method, that is, we must learn to observe the water flow in the fish tank.


2: This is actually very simple. Sprinkle a handful of fish food into the fish tank, and we can easily observe the direction of the water flow in the fish tank. It is not difficult at all. As long as we observe carefully, we will always find the bottom of the fish tank. How the manure runs on the bottom of the tank.


3: Then we will properly adjust the placement of the wave pump according to the actual situation. This thing is definitely not a big fish tank. It must be placed where it is, and it is related to the upper and lower water in the fish tank, various landscaping decorations, The location of the pump, the location of oxygen, and the amount of feces will all have a certain relationship.


4. Then we will appropriately adjust the placement of the wave pump according to the actual situation. This thing is definitely not a big fish tank. It must be placed where it must be placed, in line with the upper and lower water in the fish tank, various landscaping, The location of the pump, the location of oxygen, and the amount of feces will all have a certain relationship.


5. Another is that in fact, many fish tanks are not used at all, and most fish cannot handle it, not because there is no wave pump, or because of the filter of the fish tank, as long as we can observe the water flow in the fish tank. situation, many problems are no longer difficult problems.


四. How long does the wave pump run a day?


The wave pump needs to be on for about 4 hours a day, two hours in the morning and two hours in the afternoon. If it is a relatively advanced wave pump, with its own light-sensing effect, it will


automatically reduce the flow at night, so there is no problem with turning it on 24 hours a day. The main function of this kind of equipment is to raise water, which can strengthen the filtering effect and help maintain the water quality. But not all fish tanks need it, and it can have side effects if not used properly.


五. The difference and use of wave pump aquarium and submersible pump


Many aquarists have used a flow pump, but the placement is different. Which placement method is the most reasonable? First of all, let's understand what a flow pump is and what are its uses? The main function of the flow pump (also known as the surfing pump) is to circulate the water in the fish tank, imitating the natural water flow to make the water in the fish tank flow evenly, 


so as to achieve no dead water area in the fish tank (dead water area: the fish tank will appear when the length reaches a certain length. The area that cannot be reached by the filtered water flow, which is often referred to as the still water area or dead water area), especially in the fish tank with the upper filter, the dead water area will obviously appear in the absence of a flow pump.


Adding a flow pump in a specific area of ​​the fish tank will make the water in the fish tank form an clockwise rotating water flow, and the fish BB and impurities deposited in the dead water area will gather at the water inlet of the fish tank with the undercurrent (inverted U-shaped circulation) and


be sucked into the water. into the filtration, so that the filtration can treat the water more effectively. Simulating the natural water flow and adding water flow to the fish tank regularly will promote the metabolism of the fish and increase the activity of the fish, thereby making the fish more fit and active.


The wave pump can create artificial water flow and waves, so that fish can grow in a river-like environment. The fish will move against the current in the water flow environment and sway swimming. At the same time, the dissolved oxygen in the water is greatly increased, and the


microorganisms in the water are fully communicated, which is beneficial to the fish. growth and development. Through the action of the wave pump, the water flow in the fish tank can form a large water flow and a large circulation, which is conducive to stabilizing the water quality. That is, as mentioned in the previous point, it is conducive to the full communication of microorganisms in the water and is conducive to the stability of water quality. And the stability of water quality is very important! This is the purpose of the "big water flow, big cycle" that the aquarium industry has


repeatedly emphasized! The circulating water flow formed by the wave-making pump can help to accelerate the flow of fish to the water suction port of the pump, and achieve the effect of suction!


The DC wave-making pump has five modes, namely: fixed flow-making mode (8 gears), current-making wave-making mode (8 gears), classic wave-making mode (15 gears), feeding mode, night mode, the waveform can be adjusted at will, and the maximum The power can reach 80W, the


maximum water volume is 25000L/H, and the power can be adjusted in multiple gears to make it suitable for fish tanks of various sizes; using the most advanced 6-stage three-phase brushless frequency conversion intelligent control technology, soft start has no impact, and by adjusting the duty cycle (PWM)


To change the speed and power of the pump; low-voltage DC frequency conversion is safe and reliable, with high efficiency, large flow and low noise. The ceramic shaft core and carbon fiber bushing ensure the long service life of the pump; the simple operation panel realizes the complex dynamic seawater function; the water flow direction can be adjusted according to the need; The


water pump power adapter has a wide voltage input (AC100~240V50/60Hz), which can be suitable for a variety of power grids, and can avoid the impact of voltage fluctuations on wave making; easy installation and maintenance, suction cup type base or magnetic absorption type shock absorption base (in the fish tank The position of the pump can be moved outside) a variety of current and wave-making modes, which can realize different water waves. Suitable for fresh and sea water


It is basically suitable for all fish tank sizes, and the thickness of the fish tank should preferably be less than 15mm; the product components in the package are: wave pump body, intelligent controller, adapter, adapter wire, double-sided tape; remove the back magnet on the wave pump body bracket Suction cup, install the pump body in the middle of the inner wall of the fish tank. Tighten the inner wall of the suction cylinder with the rubber suction cup. Then move the rear magnetic chuck


obliquely to the outer wall of the cylinder. Due to the strong magnetic attraction, be careful to pinch your hands; remove the protective paper of the double-sided tape, stick it to the middle of the back of the intelligent controller, then remove the other side of the protective paper of the double-sided tape, and stick the controller to the edge of the fish tank. Easy to operate. If you don't need to


install it on the fish tank, you can remove this step; connect the 3-pin quick connection cable between the pump body and the controller, then connect the DC plug of the adapter to the controller, and connect the AC cable of the adapter.


The wave pump needs to be cleaned regularly to ensure its effective operation; when there is water on the surface of the control box, please dry it with a dry cloth to prevent water from entering the control box; when cleaning the debris in the pump, open it by rotating the front net, clockwise Rotate to lock, turn counterclockwise to open; Wipe the blades with a soft cloth, and clean the dirt of the pump body with water; this product is suitable for indoor use, but it is strictly forbidden to drop the control box and adapter into the water to avoid unnecessary losses.


六. We are aquarium equipment manufacturer



Haohai Aquatic Equipment Products Factory was established in 2012 and is located in Zhongshan City, Guangdong Province, China, with an advantageous geographical location. It is a manufacturer with rich experience in aquarium accessories and equipment manufacturing. It is a production-oriented manufacturer integrating production, sales, cross-border trade and design.


Mainly produces all kinds of air stones, magnetic brushes, diffusers, thermometers, filters, air conditioner switches, fish tank cleaning tools, aquarium pet equipment, oxygen generators, fish tank check valves, ultra-quiet air pumps, aquarium oxygen-enhancing stones, plastics, resins Crafts and other products.


The plant covers an area of ​​3000 square meters+. The company also supports processing with supplied materials, sample processing, OEM processing, OEM processing, drawing processing, manual processing, etc. The company has a complete and scientific quality management system.


The company always adheres to the tenet of "honesty, quality cornerstone, high-quality service, and abide by the contract". With high-quality products, good reputation and high-quality services, the products sell well in nearly 30 provinces, municipalities and autonomous regions across the country. Wholeheartedly cooperate with domestic and foreign merchants for win-win cooperation, common development, and create brilliance together.