Best Inverter Fish Pond Suction Machines - Best Manufacturer Picks of 2022


Advanced technology, strong sewage discharge capacity, no blockage, easy to move




Table of contents


1.Features of frequency conversion fish pond sewage suction machine

2.Scope of application of frequency conversion fish pond sewage suction machine

3.The working principle of frequency conversion fish pond sewage suction machine

4.Maintenance and maintenance of frequency conversion fish pond sewage suction machine

5.Precautions for frequency conversion fish pond sewage suction machine

6.We are aquarium equipment manufacturer



一. Features of frequency conversion fish pond sewage suction machine


1. Adopt advanced technology, strong sewage discharge capacity, no blockage



2. The tearing mechanism can tear and cut the fibrous material, and then discharge it smoothly without adding a filter screen to the pump.



3. The design is reasonable, the supporting motor power is small, and the energy saving effect is remarkable.



4. The mechanical seal of new material can make the pump run safely and continuously for more than 8000 hours. 5. The structure is compact, the movement is convenient, and the installation is simple, which can reduce the engineering cost and do not need to build a pump room.



5. It can be used in the whole head range, and the motor will not be overloaded.



6. The floating ball can automatically control the start and stop of the pump according to the required water level changes, without special supervision.



7. Double-rail automatic installation system, which brings great convenience to installation and maintenance, and people do not need to enter and exit the sump for this purpose.


8. Equipped with automatic protection control box to effectively protect the product from leakage, water leakage and overload, and improve the safety and reliability of the product.




二. Scope of application of frequency conversion fish pond sewage suction machine


The non-clogging submersible sewage pump is suitable for the discharge of industrial and commercial seriously polluted wastewater, the sewage sewage station in the main residential area, the urban sewage treatment water distribution system, the civil air defense system drainage station, the water supply equipment of the tap water, the sewage discharge of the



hospital and the hotel, and the municipal engineering building. Construction sites, mine supporting machines, rural biogas digesters, farmland irrigation and other industries, conveyor belt particles of sewage, dirt, can also be used for clean water and weak corrosive media




三. The working principle of frequency conversion fish pond sewage suction machine


Pool water purification treatment: coagulation → clarification → suction pool → disinfection → circulating filtration Coagulation: use aluminum salts, iron salts, polymers and other coagulants and impurities in the water to form large particles of sediment through flocculation and bridge action, and then through the absorption Filtration is removed. Clarification: The large particles formed by the coagulant are statically separated in the swimming pool, the sediment sinks to the bottom of the pool, and the upper layer gets clarified water. Suction pool:



Remove the sediment that sinks at the bottom of the swimming pool through a special swimming pool suction machine. Disinfection: Add disinfectant to kill bacteria, viruses, algae, etc. in the water. Circulating filtration: The treated water is pumped through a device equipped with quartz sand, activated carbon or other special filter materials to retain the residual debris in the water and further purify the water.




四. Maintenance and maintenance of frequency conversion fish pond sewage suction machine


1. After using the vacuum cleaner, please turn off the machine. Turn off the power button of the electric control box and slowly pull the cable until the handle is above the water; hold the handle to lift the whole machine out of the water.



2. Clean the suction machine. Gently turn the machine upside down on the flat ground, push open the filter box buckle and take out the filter box, as shown in the figure, then remove the garbage bag from the bottom plate along the edge, take out the filter bag, wash it, and dry the filter bag, reinstall



3. To clean the impeller, open the large cover of the impeller of the machine, and unscrew the impeller shaft with a Phillips screwdriver. You will find a lot of hair. Be sure to wear a pair of gloves and use a pair of pliers to clean the impeller and restore it.



4. Store the machine: After the machine is air-dried, roll up the cable and put it on the machine, and store the machine in a dry place. If a trolley is optional, place the machine and cables on the trolley.



5. If you do not use the machine for a long time, please be sure to turn off the main unit and the electric control, and keep the whole machine clean, put it in a dry, ventilated and cool place to avoid sunlight, and the storage temperature is in the range of 0~40°C Inside.




五. Precautions for frequency conversion fish pond sewage suction machine


1. The power cord of the sewage suction machine must be plugged into a socket with a leakage protection device and a protective ground, and ensure that the grounding of the ground wire on the socket is standardized and reliable.



2. Before starting the sewage suction machine, it must be confirmed that the cable is completely in a relaxed state, so as to avoid entanglement during work and affect the cleaning effect of the sewage suction machine. In severe cases, the suction machine may be damaged.



3. The filter bag must be cleaned immediately after each use of the sewage suction machine, so as not to affect the work of the sewage suction machine due to excessive dirt in the filter bag next time.


六. We are aquarium equipment manufacturer



Haohai Aquatic Equipment Products Factory was established in 2012 and is located in Zhongshan City, Guangdong Province, China, with an advantageous geographical location. It is a manufacturer with rich experience in aquarium accessories and equipment manufacturing. It is a production-oriented manufacturer integrating production, sales, cross-border trade and design.


Mainly produces all kinds of air stones, magnetic brushes, diffusers, thermometers, filters, air conditioner switches, fish tank cleaning tools, aquarium pet equipment, oxygen generators, fish tank check valves, ultra-quiet air pumps, aquarium oxygen-enhancing stones, plastics, resins Crafts and other products.


The plant covers an area of ​​3000 square meters+. The company also supports processing with supplied materials, sample processing, OEM processing, OEM processing, drawing processing, manual processing, etc. The company has a complete and scientific quality management system.


The company always adheres to the tenet of "honesty, quality cornerstone, high-quality service, and abide by the contract". With high-quality products, good reputation and high-quality services, the products sell well in nearly 30 provinces, municipalities and autonomous regions across the country. Wholeheartedly cooperate with domestic and foreign merchants for win-win cooperation, common development, and create brilliance together.